Description
The Bovie 2350-V is the premier electrosurgery unit from Bovie for Animal Health procedures. This unit is intended for cutting, coagulation, ablation of a variety of tissues. The Bovie 2350-V is suitable for general procedures, tumor removals, and gingivectomy procedures performed in an operating suite and procedure room. The Bovie 2350-V was engineered with the technology and safety of more expensive electrosurgical units but economically priced for animal health practice. The Bovie 2350-V offers more electrosurgery modalities than lower watt models including four (4) blend settings, allowing Veterinarians to deliver safe and precise energy applications during more complex surgical procedures. Dual monopolar ports can be activated simultaneously in fulguration to control bleeding or treat superficial tissue. The dual ports can also be utilized separately in different modes. The Cut II specialized laparoscopic mode is engineered with a lower voltage than competitive units reducing the risk of alternate site burns and increasing patient safety during minimally invasive procedures. Bovie FDFS technology measures tissue impedance 5,000,000 times a second and adjusts output 5,000 times a second for consistent energy delivery in a variety of tissues. Bipolar features are activated using a separate dedicated foot control maintaining sterility during the procedure. 10 presets for quick and easy setup.
Manufacturer part number: A2350-V
Monopolar output (Watts | Vpeak max | Crest factor typical | Frequency):
– Cut I: 200 W | 1000V | 1.7 +/- 20% | 490 kHz +/- 4.9 kHz
– Cut II: 200 W | 750V | 1.7 +/- 20% | 490 kHz +/- 4.9 kHz
– Blend 1: 200 W | 1320V | 1.8 +/- 20% | 490 kHz +/- 4.9 kHz
– Blend 2: 200 W | 1475V | 2.0 +/- 20% | 490 kHz +/- 4.9 kHz
– Blend 3: 200 W | 1650V | 2.2 +/- 20% | 490 kHz +/- 4.9 kHz
– Blend 4: 200 W | 1870V | 2.4 +/- 20% | 490 kHz +/- 4.9 kHz
– Pinpoint Coagulation: 120 W | 1800V | 3.1 +/- 20% | 490 kHz +/- 4.9 kHz
– Spray Coagulation: 120 W | 4000V | 6.0 +/- 20% | 350 to 450 kHz
– Gentle Coagulation: 120 W | 450V | 1.6 +/- 20% | 490 kHz +/- 4.9 kHz
Bipolar output:
– Macro Bipolar: 80 W | 600V | 1.5 +/- 20% | 490 kHz +/- 4.9 kHz
– Micro Bipolar: 80 W | 500V | 1.5 +/- 20% | 490 kHz +/- 4.9 kHz
– Standard Bipolar: 50 W | 250V | 1.5 +/- 20% | 490 kHz +/- 4.9 kHz
Specifications:
– Lifespan: Reusable
– Sterilization Status: Non-sterile
– Cooling System: Passive Cooling
– Technology: Isolated RF Output
– Audible/Visible Output Meter: Yes
– Pre-set Feature: Yes
– Monopolar HP Ports: 2 Ports
– Contact Monitoring Systems Range/Trip Point: 10 ohms or less over entire operating range (10C to 40C)
– Dual Activation Tone Alert: Yes
– Latex-Free: Yes
Energy Settings:
– Cut I: A general cutting with a standard RF waveform used in open and endoscopic surgical procedures, Cut I is for use in a wide range of tissue with minimal hemostasis.
– Cut II: Tailored specifically for Laparoscopic procedures, Cut II offers a precisely managed cutting energy that limits output for minimizing the potential risk of capacitive coupling and alternate site burns due to weakened insulation.
– Blend (Level 1, 2, 3 & 4): Blended cutting offers varying levels of hemostasis during a cut procedure providing increased control of bleeding at the surgical application site. Level 1: 75% Duty Cycle. Level 2: 62.5% Duty Cycle. Level 3: 50% Duty Cycle. Level 4: 37.5% Duty Cycle.
– Pinpoint: A general coagulation mode delivering rapid desiccation effects with minimal tissue damage.
– Spray: Recommended for hemostasis in highly vascular or large surface areas and for non-contact tissue coagulation to control superficial bleeding. Spray mode permits dual, simultaneous activation of two monopolar accessories with audible dual activation tone alert.
– Gentle: More concentrated coagulation than in other modes. When coagulation is necessary in short amounts of time, reduced electrode carbonization is provided.
Highlights:
– Specialized laparoscopic mode: Cut II limits output, minimizing the potential risk of capacitive coupling and alternate site burns.
– Dual monopolar spray activation: simultaneous activation in spray with audible activation tones, producing equal and even power outputs in each accessory.
– Adjustable power during activation: power can be adjusted up or down in variable steps while performing a procedure.
– Surgical memory technology: recalls the last used power and mode; stores 10 user-defined RF presets.
– Patient safety features: Bovie FDFS tissue sensing technology measures tissue 5 million times a second and adjusts to varying impedances 5000 times a second. Automatic system self-checks upon powering up the unit.
Included Items:
– Bovie Surgi-Center Pro High Frequency Electrosurgical Generator (A2350) x1
– Reusable Electro-Surgical Pencil, 100 Autoclaves (ESPR2) x1
– Grounding Plate A1200 (A1204P) x1
– Dispersive Electrode Cable For Reusable Plate 1250/2100 (A1254C) x1
